Huawei FusionSolar C&I Hybrid Cooling Energy Storage System (LUNA2000-215kWh)

*Currently, the 215kWh 400V low-voltage model supports on-grid and on/off-grid solution, while the 161kWh/107kWh model only supports on-grid solution.

Inherently Safe, All-Time Safety

Huawei proposed the concept of "C2C Dual-link Safety architecture", that is electrical and thermal safety from cell, pack, system, to consumption. Such a comprehensive design ensures safety from products to applications and sets a new benchmark for C&I ESS safety

Ensuring more useable energy for peak shaving

C2C Dual-Link Safety - Full protection from cell to consumption.

C2C Electrical-link Safety: Short Circuit Prevention and Isolation

Dual Cell Detecting

Detection of 13+ fault types and cloud based risk warning

Six-Side Pack Insulation

Patented reinforced insulation materials are used to provide 6-side all-around protection for battery packs and internal cells to survive 30 days of corrosion by electrolyte and 1500V voltage.

Five-Level System Protection

Five-level full-range overcurrent protection, covering the AC/DC protection blind spot. Unique cell-to-ground short-circuit protection, rapid shutdown within 5ms.

24-Hour Consumption Assurance

24-hr real-time triple RCA, preventing personnel injury. Rapid shutdown of PCS in case of external short circuit to prevent personnel injury and internal components.

C2C Heat-link Safety: Thermal Runaway Suppression and Protection

Cell Heat Insulation and Cooling

Inter-cell heat insulation and rapid liquid cooling, preventing thermal diffusion between cells.

Pack Positive Pressure Oxygen Barrier

IP65 protection, prevent oxygen from entering the battery pack and prevent fire inside the battery pack.

System Directional Gas Exhaust

The combustible gases are exhausted through a L-shaped duct to prevent combustion and explosion inside the cabinet.

Consumption Top Explosion Vent

Hourly fire resistance for asset safety. The top explosion vent design for personal safety.

---

More Energy

Each battery pack has a built-in energy optimizer 2.0 with an efficient bidirectional balancing

topology to improve system efficiency and achieve real-time active balancing without charge and discharge restrictions. This overcomes the short-board effect and increases the usable energy by 2% inn the lifecycle.

Lower LCOS - More usable energy. Simplified installation and O&M.

---

Pro in Thermal Control

LUNA2000-215 Series is innovating on the thermal control side with an intelligent hybrid cooling architecture. It's all about optimizing temperature, cutting energy use, and making your energy storage system last longer and work better.

Thermal Router - Lower energy consumption, longer lifespan, and higher reliability.

Intelligent Switching Between Multiple Modes

The "Thermal Router" features an advanced thermal management system for adaptive regulation and multi-mode switching based on ambient temperature conditions, similar to how the body regulates heart rate. 30% reduction in energy consumption.

High Temperature

Active liquid cooling mode. The liquid-cooled unit runs actively, low-temperature coolant to quickly cool the cells. The air-cooled module runs in parallel with medium-temperature coolant to cool the PCS.

Room Temperature

Natural air cooling mode. Only the air-cooled module runs. Medium-temperature coolant to cool the cells and PCS, lower power consumption.

Low Temperature

Waste heat utilization mode: Recycling PCS waste heat, heating the cold cells, extremely low power consumption.

Longer Performance Life, More Reliable Operation

Achieve efficient thermal management through the optimization of heat dissipation. This entails different temperature zone design, ultra-low flow resistance path, and dual loop convection cooling for cells. Longer lifespan following the strategy of 2 charge/discharge cycles per day.

---

One Management for All Lifecycle, Efficient Design and Operation

Smart design: SmartDesign 2.0, optimal solution design within 1 minute, and hour-level precise benefit analysis.

Smart scheduling: SmartEMO 2.0, the prediction precision is ≥ 90%, increasing the comprehensive revenue by 10%.

Smart O&M: Four-level monitoring from cell level to system. Online health diagnosis, locating of abnormal cells in seconds.

One for All - One Management for All Lifecycles. Once solution for All C&I Scenarios.

Installs are Easier, Costs are Lower

Organize the cabinets with the space-saving three-sided layout, cutting the front-to-back spacing to 30cm. This integrated design enables swift, effortless, cost-effective setup without extra wiring or trench digging during installation.

Three-phase four-wire PCS, no need for isolation transformer. 10-year free coolant replacement, save on operational and maintenance costs.

Source: Huawei FusionSolar